SPX Deltech HCT-1350 Heatless Regenerative Air Dryer
Desiccant Air DryersThe HCX, HCL & HCT Series
Deltech’s HC series heatless desiccant dryers are designed to efficiently dehydrate compressed air to dew points as low as ISO 8573-1 Quality Class 1
(-94°F/-70°C)
Industries such as pharmaceutical manufacturing, laboratories, hospitals, microelectronics, food packaging, paper, glass, and powder painting with low dew point requirements, utilize heatless desiccant air dryers.
Flow Rate | 1,350 ft³/min. |
Dimensions | 118" H x 60" W x 56" D |
Weight | 3722 Lbs |
Controller Features
Control Panel overlay with LED’s indicating:
• Power On
• Left Tower Drying
• Right Tower Drying
Base Filtration Package (Pre-filter and After-filter):
H3 Series Pre-filter:
Protect the valves and desiccant bed from
oil contamination
• Removes 99.99% of oil aerosol content to 0.01 mg/m3
• ISO Quality Class remaining oil - 1
P3 Series After-Filter:
Protects down-stream components from desiccant dust
• Remove 99.999% of solids 1.0 micron and larger
• ISO Quality Class solids - 2
Advanced Filtration Package (Dual Pre-filter and single After-filter):
P3 Series Pre-Filter:
Removes solids, protects the high-performance oil
removal filter
• Remove 99.999% of solids 1.0 micron and larger
• ISO Quality Class solids - 2
H3 Series Pre-filter:
Protect the valves and desiccant bed from
oil contamination
• Removes 99.99% oil aerosol content to 0.01 mg/m3
• ISO Quality Class remaining oil - 1
P3 Series After-Filter:
Protects down-stream components from desiccant dust
• Remove 99.999% of solids 1.0 micron and larger
• ISO Quality Class solids - 2