Name: SPX Deltech HCL-930 Heatless Regenerative Air Dryer
Brand: DELTECH
SKU: 7221276
Availability: InStock

Description

The HCX, HCL & HCT Series
Deltech’s HC series heatless desiccant dryers are designed to efficiently dehydrate compressed air to dew points as low as ISO 8573-1 Quality Class 1
(-94°F/-70°C)
Industries such as pharmaceutical manufacturing, laboratories, hospitals, microelectronics, food packaging, paper, glass, and powder painting with low dew point requirements, utilize heatless desiccant air dryers.

Long Description

HCL SERIES Reducing the amount of time the dryer spends purging in the regeneration cycle can save energy. Eight settings (0% to 70% in 10% increments) are furnished for users to lower the purge to match reduced air loads on the dryer. In addition, this state-of-the-art controller offers four pressure dew point settings to further tune your savings and adapt the system to your environment. Purge Economizer lets you align your purge costs with your air demands to optimize your return-on-investment. Tailor HCL Series dryers to take full advantage of air system efficiency improvements driven by air audit strategies. HCL Series provides user selectable energy savings with tailored drying cycles designed to match your peak air demands Controller Features • Choice of four fixed cycle operating modes corresponding to ISO 8573-1 Air Quality Classes • Choice of eight Purge Economizer Energy Savings settings • Switches for On/Off, Alarm and Service reminder reset • Operational LED lights for power-on, tower status, valve status, and tower pressure • Alarm LED for valve switching failure • RS-232 communications port is standard • Service reminder LED lights for filters and drains, valves and desiccant

Specifications

Flow Rate	930 ft³/min.
Dimensions	113" H x 56" W x 56" D
Weight	2414 Lbs

Equipped With

Base Filtration Package (Pre-filter and After-filter):

H3 Series Pre-filter:
Protect the valves and desiccant bed from
oil contamination
• Removes 99.99% of oil aerosol content to 0.01 mg/m3
• ISO Quality Class remaining oil - 1

P3 Series After-Filter:
Protects down-stream components from desiccant dust
• Remove 99.999% of solids 1.0 micron and larger
• ISO Quality Class solids - 2

Advanced Filtration Package (Dual Pre-filter and single After-filter):

P3 Series Pre-Filter:
Removes solids, protects the high-performance oil
removal filter
• Remove 99.999% of solids 1.0 micron and larger
• ISO Quality Class solids - 2

H3 Series Pre-filter:
Protect the valves and desiccant bed from
oil contamination
• Removes 99.99% oil aerosol content to 0.01 mg/m3
• ISO Quality Class remaining oil - 1

P3 Series After-Filter:
Protects down-stream components from desiccant dust
• Remove 99.999% of solids 1.0 micron and larger
• ISO Quality Class solids - 2

Document (1)

Overview

Description

Long Description

Specifications

Equipped With

SPX Deltech HCL-930 Heatless Regenerative Air Dryer

Associations

Follow Us